Bathroom Plumbing

1. Dripping Taps & Failed Seals

• Worn washers and cartridges
• Limescale damaging spindles
• Wastes water and stains fittings

2. Blocked Drains & Wastes

• Hair and soap scum in shower wastes
• Slow-draining basins and baths
• Smells from dry or damaged traps

3. Leaks Behind Fittings

• Water tracking down walls and through ceilings
• Damaged silicone around showers and baths
• Failed waste connections at WCs and basins

minor Repairs

• Replace tap washers and cartridges
• Reseal silicone around bath, basin and shower trays
• Clear blocked wastes and refit traps

moderate Repairs

• Install thermostatic mixer showers
• Replace WC pan, cistern and flush mechanism
• Re-tile splash zones with waterproof backer board

major Repairs

• Full bathroom strip-out and refit
• New pipework, waste runs and ventilation
• Wet-room conversions with tanking and linear drains

When Replacement Is Needed

• Bathroom is dated, leaking or inefficient
• Adding en-suites or downstairs WCs
• Wet-room or accessibility conversions

Installation Steps

1. 1

   Strip Out

   • Remove existing fittings, tiles and floor covering
   • Inspect substrate for damage
2. 2

   First Fix Plumbing

   • Run new hot, cold and waste pipework
   • Position waste outlets accurately
3. 3

   Substrate & Tanking

   • Repair floors and walls
   • Tank wet zones with membrane systems
4. 4

   Tiling & Finishes

   • Tile walls and floors
   • Fit underfloor heating where specified
5. 5

   Second Fix

   • Install bath, shower, WC and basin
   • Connect taps, mixers and waste
6. 6

   Test & Seal

   • Test for leaks under pressure
   • Silicone all wet edges and commission