Sockets & Switches

1. Burn Marks & Overheating

• Loose terminations causing arcing
• Overloaded circuits or appliances
• Sparking when plugging in

2. Loose or Broken Accessories

• Cracked faceplates from impact
• Sockets pulling away from the wall
• Switches feeling loose or unresponsive

3. Faulty Operation

• Switches not turning lights on/off reliably
• Buzzing noises or intermittent power
• USB sockets not charging

4. Water-Damaged Fittings

• Kitchen, bathroom or outdoor sockets corroded
• Splashes causing trips or shorts
• Wrong IP rating for the location

minor Repairs

• Replace cracked faceplates
• Tighten loose terminals
• Replace failed switches and faceplates like-for-like

moderate Repairs

• Replace burnt or unsafe sockets
• Upgrade to USB or USB-C sockets
• Replace standard switches with dimmers or smart switches

major Repairs

• Add new socket circuits for kitchens, offices or workshops
• Install weatherproof IP-rated outdoor sockets
• Add dedicated circuits for ovens, hobs and appliances
• Move sockets and switches as part of a renovation

When Replacement Is Needed

• Not enough sockets for modern appliances
• Renovation, extension or kitchen/bathroom upgrade
• Outdoor power for garden, garage or EV charger
• Upgrading to smart switches or USB sockets

Installation Steps

1. 1

   Plan Positions

   • Agree socket and switch locations with client
   • Check heights and zoning (especially in bathrooms)
   • Plan dedicated circuits for high-load appliances
2. 2

   First Fix

   • Run cables and chase walls if required
   • Fit metal or plastic back boxes
   • Make off cables ready for accessories
3. 3

   Second Fix

   • Terminate and fit socket and switch faceplates
   • Install RCD-protected outdoor sockets
   • Set and test smart switches and modules
4. 4

   Test & Certify

   • Polarity, continuity and RCD testing
   • Verify safe operation under load
   • Issue Minor Works or EIC certificate